The Bike


Carbon bits/Clip-ons

What most see.


< Back

The 1997 Buell S1. It hurts to ride it, but, it gets alot of looks. The previous owner added some fresh ASB rear sets, with some custom bits. Also, some carbon-fiber pieces. I added a set of Woodcraft clip-ons, a custom fabricated guage mount ( lowers the guages and wind screen, down to the lower tt.) and a set of bar-end mirrors modified and mounted in the stock locations. As far as performance, a Buell race module, open filter, and jetted carb are up top (not sure of other motor work?) The exhaust is wrapped and exits through a V&H SS2r carbon can. Runs damn good for 22k.

Next >